About this item:
WIDE USE: Each of the bolt extractor can easily and quickly extract stubborn, rusted, cracked, damaged or stripped screws, studs, bolts, fastener or nut ect. Spiral and featuring a pointing tip can firmly embed the extractor into the damaged screws or others for extra resistance and ideal gripping power for easier removal.
EASY TO USE: The screw extractor kit can take out various stuck screws by two steps within 10 secs. Use proper size drill bit to bore a hole on screw head, then reverse the remover counterclockwise into the damaged screw until it is released.
ABOUT SIZE: The screw extractor drill bit set in 6 different sizes to meet varied needs. ; They are 3/4″-1″, 9/16″-3/4″, 7/16″-9/16″, 5/16″-7/16″, 1/4″-5/16″, and 1/8″-1/4″. The full broken screw extractor comes in a molded plastic storage case.
ABOUT MATERIAL: This stripped screw extractor is made of high-quality tool steel. With high hardness and high torque though strict process setting, tempered twice and surface polishing, . Guaranteed quality, long service life, durable and easy to remove damaged screws.
PERFECT GIFT: Our bolt extractor set is a perfect gift for all homeowners, woodworkers, mechanics, artists, hobbyists etc . If you have any questions about it, please freely contact us. We can provide replacement or refund guarantee,pls be assured to buy it.
Features:
Works with any drill bit and any screw size, perfect for stripped, broken, stuck or damaged and removing screws.
High hardness screwdriver kit, you can easily remove the rusty, broken, embedded, viscous screw in a few seconds.
Use a drill bit to drill a deep hole in the screw head and then reverse the screwdriver counterclockwise into the damaged screw until it is released.
Great for all homeowners, woodworkers, mechanics, artists, hobbyists etc.
Screw Removers only, other accessories demo in the picture is not included!
Specification:
Material: High Speed Steel
Length: 51mm
Damaged screw sizes:
0 remover diameter: 2-3mm
01 remover diameter: 3-5mm
02 remover diameter: 4-8mm
03 remover diameter: 5-10mm
04 remover diameter: 6-12mm
Color: Gold/Silver
Package includes:
6 pieces/set screw extractor
I've used these several times now in my 1/4 impact driver.
they do a very nice job as long as you can put some pressure on them as you work.
something to note/ they are set up to both cut and remove only so be sure your drill is set to reverse
I saw these being reviewed and thought, hmmmm, I could use a set of those. As luck would have it the day after they arrived I was doing some work and actually needed one of these for a stripped screw. It was so easy and only took me a few extra seconds to get my job done. Awesome tool, awesome price, well worth the money.
I had been struggling to get allen key bolts out of 4 alloy wheels and once I drilled them through, these made the job simple to get them out, all 120 of them!
Brought as a gift and recipient says it was just what he was after
I was sceptical as to how well these would work, but needed to remove sheared bolts from aluminium engine block. You need to make sure the centre hole really is drilled in the centre of the stud, and give the remover a bit of a tap with a hammer to get initial purchase, but then they did the trick. Bolts removed with no thread damage! Brilliant.
All OK! Thank you! Perfect
I would not hesitate to recommend this tool to anyone that has relatively light to moderate work load for it. I'm not sure I'd say it is "professional" or "mechanic" quailty, though. Of course it is also 1/2 or less than the units that are professional/mechanic quality. That makes this unit a good buy and a good value.
Overall, I am pleased with the size/shape of the individual tools in the kit. Each item appears to be made of good quality material. The cuts, lands, and working portions of the tool(s) are well defined, clean, and seem to increase the effectiveness of the tools.
Chances are that you are going to strip a nut, bolt, or screw at some point in your DIY days. I've done it a lot, with my recent being the breaking off of a bolt in the block of a car engine. This toolset will help remedy that problem, and it is a great value too.
Really works! Product and store recommend.
These have worked excellent for me as an extractor for soft metal and plastics. As most other bits do, they struggle against hardened steel. If you have to extract a broken bleeder screw in a cooling system, they will pay for themselves the first time you use them.
Used several times now and worked like a charm everytime. Durability seems really good too.
Bought these after reading craftsman's easy outs break. So I spent the extra money and got this set from Irwin. I had a stripped out head on an Allen head bolt, so I soaked it for a week in PB blaster, heated it with a propane torch drilled into it with the supplied reverse drill bit, hammered in the easy out and with pretty heavy torque the bolt finally broke free. This may be a small victory to some but it just paid for itself in my opinion. These drill bits and easy outs are tough as nails and didn't break under heavy pressure. I would definitely recommend.
I wasn't convinced, but they worked very well
Useful for what I needed
These simple extractors can save a disaster. They can often remove sheared-off screws and bolts from tapped holes, mainly from motorbikes, cars and trucks.
Turned up on time and look as described. Not had a chance to use them yet.
Difficulties in using the "drilling" side of the tip.
This little problem is very easily solved with a classic wick.
The unscrewing is then carried out perfectly
Works well
Worked I’m glad I bought this to add to my tools
The goods were delivered quickly. Description corresponds to the quality of the norms, I recommend
Great product. Great store. Super fast shipping. Recommend.
Looks very high quality. Pleased with the fast delivery. Seller Thank you!
It's perfectly, well received. Send fast enough, received 2 weeks after order. Thank you very much
Goods consistent with the description, recommend